Custom Bathroom Mirror Hardware

Custom Bathroom Vanity Mirrors

With the purchase of any regular-sized vanity mirror the backside will come equipped with two Sawtooth “L” shaped brackets placed on the upper left and right corners. To securely hang the vanity mirror, drill or nail two holes into your wall. NOTE: screws, nails, or anchors are not provided. Carefully lift the mirror and gently guide the sawtooth brackets onto the nail or screw to lock the mirror in place.

>> Go to Customize

Oversized Mirrors

When displaying our oversized mirrors, we highly recommend for them to be leaned as opposed to being hung. If you would like to hang your oversized mirror, ensure your wall has studs exactly where you would like to install. With the purchase of any oversized mirror, you will receive the following hardware to help with your installation process.

>> Go to Customize

6” Metal Cleat Bracket

NOTE: screws, nails, or anchors are not provided.Drill or screw this Metal Cleat Bracket where you would like your oversized mirror to hang. Once again, ensure your wall is able to support this weight prior to installing by screwing or drilling into a stud.The backside of the oversized mirror will come equipped with an additional 6” Metal CleatBracket placed centered at the top of the mirror.Once the Metal Cleat Bracket has been installed and secured on your wall, carefully lift the mirror and gently guide the metal bracket on the mirror onto the metal braked attached to the wall to lock the mirror in place.

>> Go to Customize